# Gold loss at each manufacturing stage

> How to measure gold loss at each stage of manufacturing: weight before and after filing, soldering and polishing, and the loss against each allowance.

Source: https://qintar.app/en/articles/gold-wastage-by-stage.html
Language: English
قنطار (Qintar)، qintar.app

---

# Gold loss at each manufacturing stage: finding where it goes

At which stage does the gold loss happen: casting, filing or polishing?

Loss does not happen all at once: each stage takes a small part. Filing and finishing are not the same as soldering, and polishing is different again.

When you weigh the work before and after each stage, you know that part exactly, and you can compare it with the allowance you accept for that stage.

Filings and floor sweepings are not lost: they go for refining and gold comes back from them. That is why they are recorded on their own.

When a stage goes above its allowance more than once, it is a signal: a tool may need changing, or a way of working may need adjusting.

## How a piece moves through the workshop

In a gold workshop a piece passes through several hands: it is cast or formed, then filed and finished, soldered, and polished. Each step removes a little metal, as dust, shavings or residue.

A single weighing at the start and the end tells you how much was lost, but not where. Weighing between stages turns one total into a figure per stage, and that is what you can act on.

## The example in plain words

Job 610 is a batch of 21K bracelets. Filing and finishing take it from 318.4 g to 316.9 g: a loss of 1.5 g, or 0.47%, within the 0.6% allowance. Soldering takes it to 316.6 g: 0.3 g, or 0.09%, within the 0.2% allowance.

Polishing takes it to 315.4 g: 1.2 g, or 0.38%, above the 0.3% allowance. Of the 3 g lost on the job, the sheet points to polishing as the stage to look at first.

## The calculation

- Loss = weight before the stage − weight after it.
- Loss % = loss ÷ weight before.
- If the loss is greater than weight before × allowance, the stage is "Above allowance".

## Example A worked example

| Job | Stage | Weight before (g) | Weight after (g) | Loss (g) | Loss % | Status |
| --- | --- | --- | --- | --- | --- | --- |
| Example: bracelets 610 | Filing and finishing | 318.400 | 316.900 | 1.500 | 0.47% | Within allowance |
| Example: bracelets 610 | Soldering | 316.900 | 316.600 | 0.300 | 0.09% | Within allowance |
| Example: bracelets 610 | Polishing | 316.600 | 315.400 | 1.200 | 0.38% | Above allowance |

| Result | Value |
| --- | --- |
| Total loss (g) | 3.000 |

Figures marked "Example" are for illustration, and the prices are approximate as of the date the sheet was made. Type your own figures in the sheet or the calculator.

## Terms used on this sheet

- **Loss:** Gold that leaves the work during a stage and is not recovered at once (الفاقد).
- **Allowance:** The loss percentage you accept for a stage (السماح). Anything above it is worth a closer look.
- **Filings:** Gold dust and shavings from filing and polishing (رايش). They are collected and refined, so they are not truly lost.

## Step by step with the sheet

1. **The stage:** The job, the stage and the karat.
2. **The weights:** Before and after the stage.
3. **The allowance:** The percentage you accept for that stage.
4. **The loss:** The sheet works it out, with its percentage.
5. **Compare:** Within the allowance or above it.

**The sheet is free:** [Gold loss at each stage of manufacturing](https://qintar.app/en/sheets/workshop-process-wastage.html) (Excel and PDF), or [try it online](https://qintar.app/en/tools/workshop-process-wastage.html) with today's prices.

## Frequently asked questions

**What allowance should each stage have?**

That comes from your workshop's experience. The sheet suggests no figures, and the ones in the example are illustrations.

**Do the filings collected count as loss?**

Filings that are collected and sent for refining are not lost. Record them in the filings and sweepings sheet so you know how much comes back.

**Why weigh after every stage?**

So you know which stage needs fixing, instead of searching through the whole job.

**Does the karat change the calculation?**

No, the loss is in grams of the alloy you are working. The karat is recorded so you can compare jobs of the same karat with each other.

Prices and calculations are for information only. They are not financial advice, an offer to buy or sell, or a religious ruling. Check tax matters with your accountant.

**Live prices in the app.** The Qintar app shows gold and silver buy and sell prices in Egypt, your holdings at today's price, and a zakat calculator. Free, with no ads.

[Open the web app](https://qintar.app/app/) [Get it on Google Play](https://play.google.com/store/apps/details?id=app.qintar)
